Natural Stone Textured Paint
EXTERIOR WALL USE
Made from Natural Stones with Natural Colors
This product uses selected natural colored stones as colorants composed of acrylic polymers and composed of various additives. It has the effect of imitating natural stone, strong adhesion, good tensile resistance, weather resistance, water resistance, self cleaning and simple construction
Textured Paint
This product is made from selected natural colored stones as colorants composed of acrylic polymers and composed of various additives. It has the effect of imitating natural stone, strong adhesion, good tensile resistance, weather resistance, water resistance, self cleaning and simple construction
| Drying Time: | Within 24 hours under normal environmental conditions |
|---|---|
| Method of Application: | Apply by brush,roller or spray |
| Aggrgate size: | 2.5mm - 3mm |
| Effective storage period: | 60 months in a cool and dry place at 0-35 degrees Celcius |
| Color Options: | Available in a wide range of colors to match any décor |
- AVAILABILITY: In Stock
- SKU: N/A
The base layer must be smooth and clean, free from loose soil, dust, flakings and dirt removed with a scraper or wire brush. Missing edges, holes, cracks, pitted surfaces, should be repaired with polymer cement putty or suitable filler. Previously painted surface must be dusted, remove all falking coats and levelled. The moisture content of the base layer is required to be less than 8%.
Suitable for exterior of industrial and commercial buildings, office buildings, apartments, municipal projects
Direct use does not dilute anything thinner. Spray the primer with a colorful spray gun, usually from left to right,and then from right to left.
Spray gun, Roller and brush can be used to apply a thin layer of paint.
Spray evenly,the total thickness of the two coats should be 2-3mm, or according to the design requirements, the intervalshould be greater than 30 minutes.
Indoor projects can be completed in one spraying, while outdoor projectsneed to be sprayed in two times. After the textured paint is completely dry (it can dry within 24 hours undernormal environmental conditions), polish the surface with sandpaper, make it smooth.
During application, use eye protective glasses, hand gloves and masks, in case of direct contact with eye, rinse with water and soap for 10minutes, seek medical attention incase of severe effect. Dispose empty buckets safely as perlocal regulations and do not spill or empty product in any water drainage
Theoretically, 1L can coat 10-12 square meters per layer. The actual painting area will vary depending on the construction method and surface roughness.